bestbarcoder.com

/boot in .NET Attach barcode standards 128 in .NET /boot

/boot using barcode generation for none control to generate, create none image in none applications. Android The /boot part none for none ition holds the kernel and other data the system needs when it boots; it cannot be under the control of LVM. This partition is typically approximately 200 megabytes, although the amount of space required depends on how many kernel images you want to keep on hand. It can be as small as 50 megabytes.

For installation, a minimum of 300 megabytes is recommended for Fedora systems. Although you can omit the /boot partition, it is useful in many cases. Many administrators put an ext2 filesystem on this partition because the data on it does not change frequently enough to justify the overhead of the ext3 journal.

Some older BIOSs require the /boot partition [or the / (root) partition if there is no /boot partition] to appear near the beginning of the disk.. Where to put t he /boot partition caution On older systems, the /boot partition must reside completely below cylinder 1023 of the hard disk.. An easy way to none none ensure compliance with this restriction is to make the /boot partition one of the first partitions on the disk. When a system has more than one hard disk, the /boot partition must also reside on a drive on the following locations: Multiple IDE or EIDE drives: the primary controller Multiple SCSI drives: ID 0 or ID 1 Multiple IDE and SCSI drives: the primary IDE controller or SCSI ID 0. /var The name var i none for none s short for variable: The data in this partition changes frequently. Because it holds the bulk of system logs, package information, and accounting data, making /var a separate partition is a good idea. In this way, if a user runs a job that consumes all of the users disk space, system log files in /var/log will not be affected.

The /var partition can occupy from 500 megabytes to as much as several gigabytes for extremely active systems with many verbose daemons and a lot of printer and mail activity (the print queues reside in /var/spool/cups and incoming mail is stored in /var/mail). For example, software license servers are often extremely active systems. By default, Apache content (the Web pages it serves) is stored on /var under Fedora/RHEL; you may want to change the location Apache uses.

Although such a scenario is unlikely, many files or a few large files may be created under the /var directory. Creating a separate filesystem to hold the files in /var will prevent these files from overrunning the entire directory structure, bringing the system to a halt, and possibly creating a difficult recovery problem..

/var/log Some administr none for none ators choose to put the log directory in a separate partition to isolate system logs from other files in the /var directory.. 36 2 Installation Overview /home It is a common strategy to put user home directories on their own filesystem. This filesystem is usually mounted on /home. Having /home as a separate filesystem allows you to perform a clean install without risking damage to or loss of user files.

Also, having a separate /home filesystem prevents a user from filling the directory structure with her data; at most she can fill the /home filesystem, which will affect other users but not bring the system down.. Set up partiti none none ons to aid in making backups tip Plan partitions based on which data you want to back up and how often you want to back it up.. One very large partition can be more difficult to back up than several smaller ones. /usr Separating the /usr partition can be useful if you plan to export /usr to another system and want the security that a separate partition can give. Many administrators put an ext2 filesystem on this partition because the data on it does not change frequently enough to justify the overhead of the ext4 journal. The size of /usr depends on the number of packages you install.

On a default system, it is typically 2 4 gigabytes. Both /usr/local and /opt are candidates for separation. If you plan to install many packages in addition to Fedora/RHEL, such as on an enterprise system, you may want to keep them on a separate partition.

If you install the additional software in the same partition as the users home directories, for example, it may encroach on the users disk space. Many sites keep all /usr/local or /opt software on one server and export it to other systems. If you choose to create a /usr/local or /opt partition, its size should be appropriate to the software you plan to install.

Table 2-1 gives guidelines for minimum sizes for partitions used by Linux. Set the sizes of other partitions, such as those for /home, /opt, and /usr/local, according to need and the size of the hard disk. If you are not sure how you will use additional disk space, you can create extra partitions using whatever names you like (for example, /b01, /b02, and so on).

Of course, you do not have to partition the entire drive when you install Linux. You can wait until later to divide the additional space into partitions..

Copyright © bestbarcoder.com . All rights reserved.